Home > News > Company News

3 Simple Tips To Help You To Solve The Problem Of Slow Excavator Action

2022-11-29

Every excavator driver hopes that his excavator will be vigorous and motivated when working! After all, the mighty and handsome shape, coupled with the strong operating feel, can satisfy every man's heroic dream.

In the driving process, the most depressing thing is of course the slowness of the excavator. Whether it is turning or operating, it is like suffering from Alzheimer’s disease. At this time, our excavator driver will have a fist hitting. The feeling of power and nowhere in cotton...

Check if the parts are moving slowly

First tips

The operation is slow when a single action is implemented, including operations such as walking, raising the arm, turning, and turning the bucket. If it is a single operation such as walking, reversing, raising and lowering arms, and retracting the bucket, the speed is relatively slow.

For example: the pressure of the relief valve of the relevant components of the excavator is too low (need to be tested); the pump, the low pressure sensor, and the multi-way valve are faulty; the relevant solenoid valve is faulty, and the spool is issued a card.

1.Failure of the component itself:

That is, the action component itself receives poor information or has poor contact during implementation, or the pressure of the overflow valve of the relevant component is too low (the overflow valve can control the overall pressure, and the hydraulic system will overflow if the pressure exceeds the pressure that the overflow valve can withstand) , Excavator hands can check whether there is a loose screw or pressure test by knocking on the parts, so as to carry out maintenance treatment.

2.Conduction process failure:

That is, there is a failure in the command transmission process, which hinders the transmission of the command signal. Therefore, you can focus on checking the conditions of the pump, low pressure sensor and multi-way valve to see if there is a failure.

3.Operation center failure:

That is, the excavator's command is issued by the central failure and the signal cannot be sent. This situation is generally more complicated and requires professional maintenance guidance. Every excavator can carefully check the relevant solenoid valve failure and whether the spool is issued.

Check whether the excavator is moving slowly

Second tips

1. Hydraulic system:

The hydraulic system is one of the power systems of the excavator. If the excavator is slow, you should check the hydraulic system to see if there is daily maintenance on time, and whether the hydraulic oil is replaced regularly. Expired hydraulic oil will not only affect the performance of the excavator, It will corrode the hydraulic wall of the excavator.

At the same time, check whether the hydraulic oil circuit and the oil return filter element are blocked. If there is a blockage, the oil circuit should be cleaned, and the parts should be replaced when it is serious.

2. Engine power is too low:

Like the hydraulic system, the engine is also one of the power systems of the excavator. Low engine power will result in low output power, and the excavator will hold back the vehicle and slow down the entire excavator. The output power of the engine is too low, and the power is insufficient. Please analyze the output of the engine based on the DX data and whether all cylinders can work at the same time; check whether there is black smoke in the engine. If the fuel injector is severely worn, it will also cause the engine power to drop.

3. Insufficient output of hydraulic pump:

This is one of the conduction failures of the hydraulic system. The excavator can enter the service diagnosis system to perform a related pressure test to see if the excavator moves slowly due to the conduction of the hydraulic pump.

If the cold machine is normal, the warm machine moves slowly

Third tips

1.Check the oil:

Check whether the fuel used meets the requirements of the excavator. If the fuel has not been replaced for a long time or the oil is too dirty, replace it if it is too dirty; check whether there is copper debris on the oil inlet filter, which will cause the main pump to wear. If it is worn, it needs to be disassembled. Check; At this time, clean the filter screen, pilot filter element, oil return filter element, and oil suction filter element that are blocked.

2. The filter element is blocked:

Blockage of the filter element will cause the oil path to be unsmooth. Therefore, check whether the pilot filter element, the oil return filter element, and the oil suction filter element are blocked during inspection.

3. Main pump conditioner:

The piston of the main pump conditioner is stained with mud, and most of the daily work of the excavator is to deal with the soil. Therefore, it is inevitable that the piston is stained with mud. However, the blockage of the piston will cause the pump pressure of the main pump to decrease and the output power to reduce. Make the excavator move slowly. Therefore, during the daily maintenance of the excavator, the mud in all parts should be cleaned up.

www.swaflyengine.com

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept